Witam
Gdzies mi sie obilo o uszy ze mozna dioda led (taka do odczytywania bledow sterownika) wyzerowac wartosci adaptacji komputera LH-jetronic. Ma ktos wiedze jak to wykonac ?
0
1 odpowiedź w tym temacie
#1
Napisano 03 stycznia 2014 - 19:31
#2
Napisano 03 stycznia 2014 - 19:38
Reading fault memory
a) Ignition: ON
b) Press startbutton for 2 - 4seconds
c) Read pulse display and note
d) Again press startbutton
e) Read pulse display. Repeat steps d)and e) as often as necessary until the first pulse display reappears.
Note regarding erasing fault memory
a)Press start button for 2 - 4 seconds (pulse display appears).
b)Wait 3 seconds before pressing the start button for 6 - 8 seconds and in this way erase the fault previously displayed.
c)Erase each fault individually.
d)Ignition: OFF 4 seconds and wait 15 seconds. Check whether all stored faults have been rectified.
e)Ignition: ON
f)Repeat pulse readout. The figure "1" (no fault) must appear.
Resetting self-adaptation of LH control unit to average value
After the figure "1" appears, press the start button for between 6 and 8 seconds.
Ignition: OFF and wait 30 seconds.
In addition, the LH control unit adapts automatically after repairs when the vehicle is driven.
a) Ignition: ON
b) Press startbutton for 2 - 4seconds
c) Read pulse display and note
d) Again press startbutton
e) Read pulse display. Repeat steps d)and e) as often as necessary until the first pulse display reappears.
Note regarding erasing fault memory
a)Press start button for 2 - 4 seconds (pulse display appears).
b)Wait 3 seconds before pressing the start button for 6 - 8 seconds and in this way erase the fault previously displayed.
c)Erase each fault individually.
d)Ignition: OFF 4 seconds and wait 15 seconds. Check whether all stored faults have been rectified.
e)Ignition: ON
f)Repeat pulse readout. The figure "1" (no fault) must appear.
Resetting self-adaptation of LH control unit to average value
After the figure "1" appears, press the start button for between 6 and 8 seconds.
Ignition: OFF and wait 30 seconds.
In addition, the LH control unit adapts automatically after repairs when the vehicle is driven.
Podobne tematy
Temat | Forum | Autor | Podsumowanie | Ostatni post | |
---|---|---|---|---|---|
S212 jedna tylną lampa LED świeci słabiej... |
Mercedes C, E i CLK | Qba85 |
|
||
Odczytywanie kodów i ich kasowanie m111 |
Mechanika, Technika, Elektryka, Serwis i Diagnostyka... | Maciej84 |
|
||
[c124] 3.0 24 jak czytac bledy KE-jetronic |
Mechanika, Technika, Elektryka, Serwis i Diagnostyka... | nowyc124 |
|
||
kasowanie błędów sl500 '92 |
Mercedes SL, SLK | piero45 |
|
||
[W140] Błędy migane diodą - m104.990 |
Mercedes S, CL i SEC | majkel333 |
|